Luxury Concrete launches Primacrete Joint, the new grout for tiles

December 15, 2021

Luxury Concrete launches Primacrete Joint tile grout, an ideal grout designed to be the best ally of Easycret ready-to-use microcement. It is a product that is designed to facilitate the complete application of the grouting.

This tile joint filler has been specially manufactured for smoothing surfaces in bathrooms and kitchens, both indoors and outdoors. It is highly resistant to water and damp environments and offers excellent adhesion.

Primacrete Joint is recommended for joints up to 10 millimetres thick. It is available in three types: 0-2, 2-5 and 5-10 mm. The choice will depend on the thickness of the joint.

Tips for applying the filling putty

Before applying the filler, make sure that the surface is level and completely clean. The substrate must be dry, free of limescale, dust and dirt. With a clean substrate, Primacrete Joint can be applied on tiles, ceramic, plaster, concrete, plasterboard, bricks, stone or painted surfaces.

Before applying the microcement, 12 to 24 hours should be allowed to elapse from the application of the filler. It is not advisable to use Primacrete Joint at temperatures below 8°C or above 35°C, or at humidities of more than 80%.

It is also advisable to avoid applying the filler in direct sunlight or on substrates subject to permanent humidity.

With this product, Luxury Concrete continues its commitment to innovation in decorative coatings for luxury finishes. Our desire for continuous improvement of materials led us to develop Primacrete Joint, which is the perfect primer for Easycret.