Varnishes

Protective and decorative sealers for microcement
Download Product Catalogue

Varnishes for microcement

Luxury Concrete's range of varnishes offers the best performance to protect the microcement finish. This line of sealers offers excellent mechanical resistances to guarantee the protection of the coating and enhance its decorative effects.

Luxury Concrete coatings are ideal for application on both interior and exterior surfaces and can be applied on all types of substrates. They are sealers suitable for vertical and horizontal decorative cementitious coatings. They provide the coating with a high resistance to abrasion, UV rays, stains and commonly used cleaning chemicals.

They also provide scratch resistance and facilitate the cleaning of the microcement surface by creating a protective film.

Primacrete Finish

It is the adhesion bridge used before the application of the varnish to waterproof and consolidate the microcement. It is a water-based sealer that gives the microcement hardness and homogeneity.

It is a product that also allows to create a protective and consolidating film on microcement coatings for swimming pools.

Characteristics :
Sealer formulated from acrylic copolymer in emulsion.
Sealer for Concrete Pool products.
Bonding bridge between microcement and sealer.
Technical Data Sheet

Concrete Finish WT

Concrete Finish WT by Luxury Concrete® is a water-based sealer varnish specifically formulated to protect microcement. It is a perfect sealer to protect decorative coating and offers matte, satin or gloss finishes.

Le The mixture is composed of two products: polyurethane (Component A) and catalyst (Component B). Concrete Finish WT polyurethane is colorless and does not yellow under the action of sunlight. Microcement coatings should be protected with Concrete Finish WT after priming with an acrylic resin.

Characteristics:
Water-based polyurethane for the protection of microcement.
Matte, satin, gloss, super-matt and anti-slip finishes.
Technical Data Sheet

Concrete Finish One

Concrete Finish One is the new single-component water-based varnish made to enhance the colour of Easycret ready-to-use microcement. It offers a matt or satin finish perfect for embellishing finishes and reinforcing the renewed appearance of the surface.

This transparent sealer varnish is ready to apply directly on the surface, either indoors or outdoors. Its performance goes beyond aesthetic finishes. It is the perfect product to highlight the textures of ready-to-use microcement.

It offers excellent adhesion, water, abrasion and scratch resistance. Prolonged exposure to the sun will not cause yellowing. It is the best ally to complete the application of Easycret ready-to-use microcement on floors and walls. Applicable on epoxy microcement.
Technical Data Sheet

Concrete Finish DSV

Concrete Finish DSV is a two-component (A+B) solvent-based polyurethane. It is suitable for the protection of microcement in interior and exterior spaces. Before applying Concrete Finish DSV, it is essential to check that the substrate is dry and free of dust. Depending on the climatic conditions and ventilation of the work space, it will be necessary to allow at least 24 to 48 hours to elapse before applying the polyurethane on the microcement.

Characteristics:
Solvent-based acrylic polyurethane varnish.
Matte, satin and gloss finish.
Protects the microcement in interiors and exteriors Add features
Technical Data Sheet

Concrete Finish WT Pool

Concrete Finish WT Pool is a single-component water-based sealer for the Concrete Pool system that creates a protective and consolidating film to protect and maintain the original conditions of the microcement without losing its properties.

When applied, it improves chemical and mechanical resistance partly because it resists the alkalinity of microcement and has low water absorption and is permeable to water vapour.

It is very easy to apply and under its milky white appearance hides one of the fastest drying times to the touch: 20 minutes (always depending on the environmental conditions and temperature at the time of use). Before applying it, it is necessary to clean the substrate and then apply Concrete Finish WT Pool in two coats, with a distance between them of 4 to 6 hours.
Technical Data Sheet
I WANT TO BE A DISTRIBUTOR